Contact Us

Xuzhou Rainbow Machinery and Equipment Co.,Ltd

Monday-Saturday 8:30 am - 17:30 pm

Tel.: +86-516-85957616

Fax: +86-516-85957616

Add.: Room 1-1826, Office Bldg. Shimao Square, Yunlong District, Xuzhou, Jiangsu, China (Mainland)


Contact: Mr. Jerry Meng

Mobile: 86(0)18118539199


Skype: rainbowcompany1688

WhatsApp: +86 137 7677 3768


Type Of Excavator Digging Bucket

- Aug 04, 2017 -

Standard digging bucket is a common standard digging bucket in small and medium-sized excavators, the thickness of the plate is adopted, and there is no obvious reinforcement process on the bucket. Characteristic is: bucket capacity is larger, the bucket mouth area is larger, has the big heap surface, therefore has the high fill coefficient, the work efficiency is high, the production cost is low. Suitable for general clay excavation and sand, soil, gravel, such as the lighter operating environment, but also known as Earth bucket. The disadvantage is: because the plate thickness is small, lack of reinforcement version, Anti-wear plate and other strengthening process, life is short.

To strengthen the digging bucket is on the basis of the original standard bucket to the high stress and easy wear of high-strength wear-resisting steel material for reinforcement treatment of the digging, it not only inherited the standard bucket of all the advantages and greatly improve the strength and wear resistance, the service life is greatly prolonged. Suitable for digging hard soil, soft stone, gravel, gravel loading and other heavy operations.

The overall use of rock digging bucket plate thickening, the bottom of the reinforcement plate, increase the side guard plate, install the protective plate, high-strength bucket gear seat, suitable for stone, Zhijian, wind fossils, flint, blasting ore loading, such as heavy operating widely used in ore mining and other harsh conditions. Excavator Mud Bucket is also known as dredging bucket, there is no bucket teeth, wider width, mud bucket is very suitable for the need for large capacity of the slope, such as surface dressing, river, ditch and other dredging work.

Tilt bucket in the mud bucket with all the characteristics, can also be controlled by the role of oil cylinder rotation digging, the maximum tilt angle of 45 degrees, do not need to change the position of the excavator can carry out operations, easy to complete the ordinary bucket can not complete the precise operation. Apply to brush slope, the whole equality plane recuperation and river, ditch dredging work. Not suitable for heavy working environment such as hard soil and stony soil excavation.

Related Products